Oven Cryo System Overview
Thermo Scientific
WARNING This operation must be carried out by authorized and trained Thermo Fisher
Scientific Service Field Engineers.
The cryo system requires the use of liquid nitrogen or carbon dioxide as coolant. Before
using liquid nitrogen or carbon dioxide, read the indications of hazards, and the
instructions reported in the Safety sheet supplied by the manufacturer with reference to
the CAS number (Chemical Abstract Service). See also
Precautions"
on
page xxix
Two Oven Cryo Upgrade Kits are available:
• Oven Cryo with Liquid Nitrogen (LN
• Oven Cryo with Carbon Dioxide (CO
Each upgrade kit contains all the material required to install the Oven Cryo system on your
GC. See
Figure 530
and
Figure 530. Oven Cryo Kit for Carbon Dioxide
and
"Carbon Dioxide Safety Precautions"
) as coolant.
2
) as coolant.
2
Figure
531.
TRACE 1300 and TRACE 1310 Hardware Manual
10
Adding Systems
Adding the Oven Cryo System
"Liquid Nitrogen Safety
on
page
xxx.
497