Hardware Specifications - Nexcom NIFE 103 User Manual

Chapter 1: Product Introduction

Hardware Specifications

CPU Support
▪ Onboard Intel Atom
® processor E3826 dual core 1.46GHz
Main Memory
▪ Onboard type 2GB DDR3L RAM
– Un-buffered and non-ECC
Display Option
▪ 1x Micro HDMI DisplayPort (Type D)
I/O Interface - Front
▪ LEDs for power LED, battery low LED, WWAN LED, WLAN LED,
1 x programmable GPO LED
▪ 1 x RS232/485 support auto flow control
– RS232 (Tx/Rx/CTS/RTS only)
– RS485 support auto flow control
– Support 2.5KV isolation protection
▪ 2 x Intel
I210AT GbE LAN ports, support WoL, teaming and PXE
®
▪ 1 x USB 3.0 (900mA per each)
▪ 1 x USB 2.0 (500mA per each)
I/O Interface - Top
▪ 1 x Micro HDMI DisplayPort (type D)
▪ 1 x System reset button
I/O Interface - Bottom
▪ 1 x 4-in/4-out 5V GPIO via 10-pin terminal block
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Storage Device
▪ Onboard 16GB eMMC
▪ Optional mSATA module
Expansion Options
▪ 1 x Full size mini-PCIe socket for optional mSATA/4G/3.5G/LTE modules
(USB signal only)
▪ 1 x Half size mini-PCIe socket for optional Wi-Fi module
(PCIe and USB signal)
Power Requirements
▪ Power input: typical +24VDC ±20%
▪ 1x Optional 24V, 60W power adapter
Dimensions
▪ 56.5mm (W) x 100mm (D) x 120mm (H)
Construction
▪ Aluminum and metal chassis with front access design
Environment
▪ Operating temperature:
Ambient with air flow: -5°C to 55°C
(according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
▪ Storage temperature: -20°C to 75°C
▪ Relative humidity: 10% to 93% (non-condensing)
▪ Shock protection:
– mSATA/eMMC: 50G, half sine, 11ms, IEC60068-27
2
NIFE 103 User Manual