Hardware Specifications - Nexcom PEAK 980 User Manual

Chapter 1: Product Introduction

Hardware Specifications

CPU Support
▪ 8th/9th generation Intel
Core™ i9/i7/i5/i3/Pentium LGA 1151 socket
®
processor, MAX Qcta core: 65W
Main Memory
▪ 2x DDR4 SO-DIMM memory socket with non-ECC support, up to 32GB
2666MHz
Platform Control Hub
▪ Intel
® Q370/H310 (co-design) Express Chipset
BIOS
▪ AMI (UEFI)
Display
▪ 1x DVI-I connector
VGA: (resolution up to 1920x1080@60Hz)
DVI-D: (resolution up to 1920x1080@60Hz).
▪ 1xDP connector (resolution up to 4096x2160@24Hz/3840x2160@60Hz)
System
▪ 2x USB3.1 (Gen 1), 6x USB2.0, 3x RS232, 1x RS232/485/422
▪ 1x Front panel header, digital I/O (4In/4Out), WDT.
▪ Supports TPM 2.0 (optional)
▪ 2x Fan connector
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
Storage
▪ 4x SATA III (6.0Gb/s) ports [support RAID 0/1/5/10 by Q370 only]
▪ 1x M.2 2280 M-key (PCIex4/SATA3) [by Q370 only]
Expansion Slot
▪ 1x PCIex16 (Gen 3) signal form processor
▪ 1x PCIex4, 1x PCIex1 (signal form PCH)
▪ 1x PCIe 60pin connector, (2x PCIex4 + 1xPCIex1) [by Q370 only]
▪ 1x M.2 2280 M-key (PCIex4/SATA) [by Q370 only]
Rear I/O
▪ 2x USB3.1 (Gen 1)
▪ 2xRJ45
- 1x Intel ® PHY i219LM Giga LAN (supports Intel
- 1x Intel i211AT Giga LAN
®
▪ 1x DVI-I connector
Internal I/O
▪ 6x USB2.0
▪ 3x Serial ports 3x RS232, 1x RS232/485/422 (by COM2)
▪ 1x Digital I/O interface (4In/4Out)
Power Requirements
▪ Power source from Backplane through Golden Finger and AUX +12V 2x2
connector
2
® AMT 12.0)
PEAK 980 User Manual