Vtc 210 Hardware Specifications - Nexcom VTC 210 Series User Manual

Chapter 1: Product Introduction

VTC 210 Hardware Specifications

CPU
▪ Rockchip RD3328 Qual-Core ARM
Memory
▪ DDR4 2GB on board (BOM option 4GB)
Storage
▪ eMMC 16GB on board
▪ 1 x internal microSD slot
Expansion
▪ 1 x M.2 3042 Key B (USB 2.0, USB 3.0) for WWAN with 1 x internal Micro
SIM
▪ 1 x USB 2.0 wafer for WiFi module
GNSS and Onboard Sensor
▪ 1 x Default U-blox NEO-M8N GNSS module for GPS/Glonass/QZSS/
Galileo/Beidou
▪ G Sensor and gyroscope
I/O Interface-Front
▪ 1 x Power button with LED
▪ 4 x LED for WWAN, WLAN, LAN1, LAN2
▪ 2 x RJ45 10/100/1000 fast Ethernet with LED
▪ 1 x USB 2.0 Type A
▪ 1 x Reset button
▪ 2 x Antenna holes for WLAN
▪ 1 x Phoenix connector for power (9~36VDC)/GND/ignition input
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
® Cortex-A53 processor
I/O Interface-Rear
▪ 1 x HDMI 2.0a for 4K@60Hz output (BOM option 2nd display, 1 x VGA
output + 1 x audio jack output (L/R))
▪ 3 x Antenna holes for WWAN and GNSS
Power Management & Software Support
▪ System power On/Off by ignition signal
Operating System
▪ Linux
Dimensions
▪ 130 x 100 x 31 (W x D x H) (mm)
Weight
▪ 0.5kg
Environment
▪ Operating temperatures: -20°C~70°C
▪ Storage temperatures: -40°C~85°C
▪ Relative humidity: 90% (non-condensing)
Vibration & Shock
▪ Vibration
- Operating: MIL-STD-810H, Method 514.8, Category 4, common
carrier US highway truck vibration exposure
3
VTC 210 Series User Manual