Configuration Using Dist500-Configuration; Update To The Current Service Software Required; Notes On The Firmware; Fig. 27: Version Of The Service Software Program - Menu Point "?" - Please Check - IRIS IRMA MATRIX 2 Installation Manual

47/74 IRMA MATRIX R2 CAN Installation manual
released
8.2

Configuration using DIST500-Configuration

The service software "DIST500-Configuration 3.9.6.187"
configuration of the system. The Configuration Tool instructions describe the individual
steps of the configuration in detail.
8.2.1

Update to the current service software required!

Fig. 27: Version of the service software program - Menu point "?" - please check!
IRMA MATRIX requires a new service software version from version 3.9.6.xxx on or higher.
It is available on the Internet on
Configuration_3.9.6.xxx.zip). It is downward compatible with its predecessor.
Only the up-to-date software program enables you to utilize the full sensor functionality.
8.2.2

Notes on the firmware

Fig. 28: Sensor selection and firmware
We continue developing the sensor firmware (here in Fig. 28 e.g. "Application
2.1.270.6635") to reflect technological progress. As downward compatibility with the
predecessor version is ensured, different firmware versions in different deliveries are by no
means a functional restriction.
Firmware versions having "1" as the first Fig. of the version designation must not be
installed any more.
7
Below named "Configuration Tool"
Rev. 1.6 2018-09
http://www.irisgmbh.de/
7
and higher is used for the
(file name: DIST500-