CDD-880 Multi Receiver Router
Rear Panel Connections
3.3.2.4
'ETHERNET | TRAFFIC/MANAGEMENT | GE' Gigabit Ethernet
Connector (RJ-45F)
Use this port either for remote management and control (M&C) of CDD-880 functions
via SNMP/HTTP, OR for Gigabit Ethernet terrestrial data traffic.
•
Port operates at 10/100/1000 Mbps, half and full duplex, auto-negotiating.
•
The maximum Ethernet packet size is 2026 bytes in Router Mode and 2014
bytes in BPM (Bridge Point-to-Multipoint) Mode (including Ethernet headers
and 2 VLANs)
•
This port features two operational LED indicators:
o LNK – Comms Link detected (glows amber)
o ACT – Activity detected (flashes green)
3.3.3
Terrestrial Traffic – 'ETHERNET | TRAFFIC | GE' Gigabit Ethernet
Connector (RJ-45F)
Use this port for Gigabit Ethernet terrestrial data traffic.
•
Port operates at 10/100/1000 Mbps, half and full duplex, auto-negotiating.
•
The maximum Ethernet packet size is 2026 bytes in Router Mode and 2014
bytes in BPM (Bridge Point-to-Multipoint) Mode (including Ethernet headers
and 2 VLANs)
•
This port features two operational LED indicators:
o LNK – Comms Link detected (glows amber)
o ACT – Activity detected (flashes green)
Connector Type
Name
ETHERNET |
RJ-45 female modular
TRAFFIC/MANAGEMENT
jack
| GE
Connector Type
RJ-45 female modular jack ETHERNET | TRAFFIC GE
3–10
Name
MN-CDD880
Revision 2
Direction
In/Out
Direction
In/Out