Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Updating Firmware
o Double-click on the archive file name, and then follow the prompts provided by the
user-supplied utility program. Extract, at a minimum, two files:
4. Confirm availability of the firmware files in the temporary folder.
There are several ways you may view the contents of the temporary folder on a Windows-
based PC:
a) From the Windows Desktop:
•
Double-left-click the "temp" folder saved to the Windows Desktop.
•
Use Windows Explorer to locate, and then double-left-click the "temp" folder.
•
Use the 'Browse' window ([Start] > ...Run > [Browse]) to locate, and then double-
click the "c:\temp" folder.
b) Using Command-line:
•
Type "cd c:\temp" at the Command-line prompt to change to the temporary
directory created earlier using Command-line.
•
Type "dir" to list the files extracted to the temporary directory from the
downloaded archive file.
The firmware files have been successfully downloaded and are now available for transfer to
the CDD-880.
FW0000423x_CDD880.bin – the Firmware Bulk image file (where 'x' denotes
the revision letter), and
CDD-880ReleaseNotes_v#-#-#.pdf – the Firmware Release Notes PDF file
(where '#-#-#' denotes the firmware version number).
4–7
MN-CDD880
Revision 2
Advertisement
Table of Contents
