Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Updating Firmware
b) Reboot the CDD-880:
•
Go to either the CDD-880 HTTP Interface 'Admin | Firmware' page or the 'Utility |
Reboot' page:
•
Click [Reboot] to reboot the unit. A dialogue box
appears to prompt continuation or cancellation of the
reboot process:
Click [OK] to continue the reboot process, or [Cancel] to abort the process and
return to the Utility | Reboot page.
Once the reboot process resumes, the Utility | Reboot page is replaced with the
dynamic message "Please wait... CDD-880 is rebooting. Login will be required in XX
seconds" – the time count decrements to 0 seconds before the unit reboots. After
the reboot, login is required once again to resume use of the HTTP Interface.
The CDD-880 is now operating with its latest firmware. The firmware update process is now
complete.
4–10
MN-CDD880
Revision 2
Advertisement
Table of Contents
