Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Ethernet-based Remote Product Management
6.3.5.2
Utility | Reboot
Use this page to perform a soft reboot of the CDD-880. Note that the function of this page is
identical to the System Reboot section of the Admin | Firmware' page described earlier.
System Reboot
Click [Reboot] to reboot the unit. A dialogue box appears to
prompt continuation or cancellation of the reboot process:
Click [OK] to continue the reboot process, or [Cancel] to abort the process and return to the
Utility | Reboot page.
Once the reboot process resumes, the Utility | Reboot page is replaced with the dynamic
message "Please wait... CDD-880 is rebooting. Login will be required in XX seconds" – the time
count decrements to 0 seconds before the unit reboots. After the reboot, login is required once
again to resume use of the HTTP Interface.
Figure 6-27. Utility | Reboot Page
6–46
MN-CDD880
Revision 2
Advertisement
Table of Contents
Need help?
Do you have a question about the CDD-880 and is the answer not in the manual?
Questions and answers