Festo CPX-FB40 Description page 64

A Technical appendix
Network-specific characteristics
Network protocol
Specification
Supported protocols/standards
Transmission rate
Max. address capacity, inputs/outputs
Crossover detection
Cycle time
Answer delay time (PReq/PRes)
Delay time of integrated hub
1) Poll-request-to-poll-response
Tab. A.3
64
Ethernet POWERLINK
Standards/norms with reference to
Ethernet POWERLINK:
– IEC 61784-2 (CPF13)
– IEC 61158
– IEEE 802.3
– IP-based protocols (UDP, TCP, ICMP, ...)
– EN 50325-4 (CANopen)
100 Mbit/s, half-duplex operation
64 byte/64 byte (operating-mode-independent)
Auto-MDI/MDI-X
Min. 600 µs
1)
Max. 10 µs
< 1 µs
Festo – P.BE-CPX-FB40-EN – 1408NH – English