Festo CPX-FB40 Description page 41

3 Commissioning
I/O configuration
After the CPX terminal is added to a project, all CPX modules are available.
Configuration of the individual input and output modules is automatically performed with
regard to data length and data type.
Note
Cyclical transmission is deactivated in Automation Studio as default and must be manu-
ally activated for all inputs and outputs.
• Activate the parameter "Cyclic transmission" for all input and output modules as
described subsequently.
Procedure
1. In the Physical View in "Project Explorer", click with the right mouse key on the CPX terminal.
A function menu opens.
2. Select "Open I/O Configuration".
The "I/O Configuration" work book is displayed.
Fig. 3.11
Festo – P.BE-CPX-FB40-EN – 1408NH – English 41