Festo CPX-FB40 Description page 39

3 Commissioning
Adding a CPX terminal to a project
After the dynamic device description file (XDC file) has been generated with the Festo Maintenance Tool
(CPX-FMT) software and imported into Automation Studio, the CPX terminal is available in Automation
Studio as an Ethernet POWERLINK device and can be added to a project.
Procedure
1. In the Physical View in "Project Explorer", click with the right-hand mouse key on the CPU icon.
A function menu opens.
2. Select "Open POWERLINK".
Fig. 3.8
3. In the menu, select "Insert" > "Module...".
The dialogue "Select controller module" opens.
Fig. 3.9
4. Expand the entry "POWERLINK Devices".
Festo – P.BE-CPX-FB40-EN – 1408NH – English 39