Festo CPX-FB40 Description page 40

3 Commissioning
5. Select the imported CPX terminal and confirm the selection with "Next".
The dialogue "Module Parameter" opens.
Fig. 3.10
6. Enter the correct station number (here 2).
Note
Specification of the station number must agree with the setting of DIL switch 3 on the
bus node (
7. Confirm the station number entry with "Next".
The CPX terminal is added to the AS project and appears as an entry in the Physical View
in the "Project Explorer".
40
2.4.7 Setting the station number).
Festo – P.BE-CPX-FB40-EN – 1408NH – English