Festo CPX-FB40 Description page 57

4 Diagnostics and error handling
M (modify) – parameterisation modified or forcing active
LED (yellow) Process
ON
OFF
LED
illuminated
ON
OFF
LED flashes
ON
OFF
LED is not
illuminated
1) The display of the Force function (LED flashes) has priority over the display of the setting for the system start (LED lights up).
Festo – P.BE-CPX-FB40-EN – 1408NH – English
Status
Setting: System start with
saved parametrisation and
saved CPX expansion;
Parameters and CPX expan-
sion are stored permanently.
1)
Force is active
Setting: System start with
default parameterisation
(factory setting) and cur-
rent CPX expansion;
external parameterisation
is possible (presetting).
Significance/error handling
For replacement of the bus node or
CPX terminal in case of service, para-
meterisation is not created automatic-
ally by the higher-order system
(PLC/IPC).
• Save and apply the parameterisation
when the bus node is replaced.
The Force function is enabled.
Further information can be found in
the CPX system description
( P.BE-CPX-SYS-...).
–
57