Table of Contents
Advertisement
8.4
Fuel cartridge sensor FS1
By default, the EFOY Pro does not monitor the actual fill level of the fuel
cartridge. The fuel gauge for the fuel cartridge is just an indicator and
calculates the methanol consumption. The FS1 fuel cartridge sensor must
be used to measure the actual fill level. The EFOY Pro reports a fuel level
error if the cartridge is used up.
The optional fuel cartridge sensor FS1 indicates if the fuel level drops
below the position of the sensor. This early warning gives the user time to
change the cartridge before it is completely empty.
The fuel cartridge sensor FS1 may also be used with fuel cartridges that
are partly empty. It sends a signal to the EFOY Pro fuel cell when the fill
level falls below the sensor.
Page 90
Data Interface and Optional Accessories
You connect the sensor to the EFOY Pro
data interface.
The sensor should be combined with a
remote monitoring system, e.g. the GSM
modem GSM-2-SMS.
You fasten the fuel cartridge sensor to the
fuel cartridge holder for M10 fuel
cartridges using two screws. You can
choose from two different heights to
mount the FS1.
A detailed description is available in the
user manual "Fuel cartridge sensor FS1".
Advertisement
Table of Contents
