Table of Contents
Advertisement
7.3
Adding EFOY recovery fluid
WARNING!
If this message is displayed frequently, check that the air supply at the
installation location is sufficient. There is no need to add EFOY recovery
fluid under normal operating conditions.
Never refill the fuel cell with more than one bottle of EFOY recovery fluid
at a time.
Use original EFOY recovery fluid only.
Switch off the EFOY Pro fuel cell before refilling with EFOY recovery fluid.
Disconnect the charge line.
Make sure that no dirt or foreign bodies enter the fill opening.
Page 74
If the internal EFOY fluid level is low, the
red LED on the EFOY Pro fuel cell comes
on and the message "Please refill
recovery fluid" appears on the operating
panel display.
1.
Use a clean pair of scissors to cut off
the tip of the bottle.
INFO :
The EFOY recovery fluid bottle is
for one time use only.
2.
Unscrew the openinig screw for
EFOY fluids (EFOY fluids only) with 6
mm allen key. Keep the screw close
for further use.
3.
Insert the tip of the bottle into the
connection nozzle on the device and
slowly squeeze the entire contents
slowly into the opening.
Troubleshooting
Advertisement
Table of Contents
