Operation
Selecting a fuel cartridge
INFO:
A detailed description of the DuoCartSwitch DCS1 is available in the
respective user manual.
5.1.3
Info screen
During subsequent operation of the device, an info screen appears after
switching the device on:
1.
Use [][], to select whether you want to
use a single fuel cartridge or a
DuoCartSwitch DCS1 for the relevant
connector.
2.
Press [ok] to confirm your selection.
3.
Select the relevant fuel cartridge for each
connector.
4.
Press [ok] to confirm your selection.
"Connector #1" is displayed first. If you
confirm this selection, you can select
"Connector #2".
5.
Press [ok] to confirm your selection.
Use
to access the operating mode.
Press [menu] to access the main menu.
Press [] to access the system information.
The first line indicates the operating mode
selected, e.g., "Automatic" (see chapter 5.4
"Operating modes" on page 59).
Page 39