Table of Contents
Advertisement
A.
CAT5 data line
B.
Interface Adapter IA1
C.
PC (COM interface)
Page 76
Data Interface and Optional Accessories
Pin
Data Interface
1
DuoCartSwitch DCS1
2
RS232 TxD (Transmit Data)
3
RS232 RxD (Receive Data)
4
GND, Ground
5
Battery +
6
Fuel Cartridge Sensor FS1
7
Remote On
8
Parallel/hybrid operation control
The interface adapter IA1 is used to
connect the EFOY Pro to a computer or
modem via the COM connection.
The USB adapter enables you to connect
the interface adapter to the USB connection
if no COM connection is available.
When using a communication interface, the
supplied ferrite must be mounted to the
communication cable. The communication
cable must be laid through the ferrite twice
("loop"). The ferrite must be placed as
close as possible to the EFOY Pro fuel cell.
Advertisement
Table of Contents
