Table of Contents
Advertisement
Installation
4.2
Mounting the fuel cell
Select a suitable location for installation as described in chapter 4.1
"Installation space requirements" on page 21.
Observe the dimensions in chapter 3.3 "Specifications" on page 18.
DANGER!
Leakage of methanol poses a fire hazard!
Do not drill or screw into the housing. Components could be harmed and
methanol could leak out.
1.
Place or position the device at the desired location.
2.
With the 19" rail bar the device can be mounted with screws to a
19" rack. Use 4 screws each side for mounting.
Optional the device can be mounted in other installation locations.
The fixation in every direction is important for a proper operation.
Page 25
Advertisement
Table of Contents
