INFO:
The factory defaults for all battery types are based on experience and
the parameters for the LiFePO4 batteries are tested and approved
only with specific batteries. Please refer to your dealer or follow the
advice of the battery manufacturer.
Battery parameters
CAUTION!
Incorrectly set operating parameters may damage the device. This may
nullify your warranty.
Only use the precise values permitted for the battery parameters and
battery protection settings (see page 49).
CAUTION!
Adjust the battery settings according to the application.
Check the battery specific characteristic curve to set the battery
parameters fitting to the discharge values.
Page 46
You can select the following options in the "Battery
parameters" menu:
-
Switch-on delay
-
Switch-on voltage
-
Switch-off voltage
-
Switch-off current
-
Absorption time
-
Min. charge time
-
Max. charge time
-
Hybrid (only when external control is on)
-
Factory defaults
This option allows you to undo all the settings
in the menu "battery parameters". Press [ok]
to confirm or [] to cancel.
Operation