Connecting the MT60 fuel tank
2
INFO:
For use in stationary and vehicle application an appropriate fastening
has to be used. The MT60 only should be installed in upright position.
The installation as well as the safety related inspection has to be done
by the user.
Removing the fuel cartridge
Page 56
4.
Screw the EFOY Pro fuel cartridge
connector (1) directly onto the MT60
fuel tank (2)
5.
Press [ok] on the operating panel so
that the red warning light and error
message are no longer displayed.
Select the installed fuel cartridge on the
operating panel (see chapter 5.3.2
"Selecting a fuel cartridge" on page 57).
1.
Unscrew the fuel cartridge connector
from the empty EFOY fuel cartridge.
2.
Remove the empty EFOY fuel
cartridge.
3.
Use the screw cap to seal each
EFOY fuel cartridge securely after
use.
Operation