Table of Contents
Advertisement
Operation
5.3.2
Selecting a fuel cartridge
When you select the "Fuel cartridge" submenu in the main menu, the
display shows the fuel cartridges already enabled and the device
connectors.
INFO:
If you have not connected a full fuel
cartridge, disable the fuel gauge by
selecting "Disable fuel gauge" in the
menu.
1.
Select an active fuel cartridge to edit it
directly.
2.
Press [ok] to confirm your selection..
You can select the following actions in the fuel
cartridge submenu:
-
Reset:
Resets the counter after the fuel cartridge
has been changed to 100%.
-
Enable:
Enables the fuel cartridge.
-
M10 / M28 / MT60:
Changes the fuel cartridge type for the
respective connector.
3.
Select a connector to edit the connector and
any associated fuel cartridges.
4.
Press [ok] to confirm your selection.
Page 57
Advertisement
Table of Contents
