Table of Contents
Advertisement
Note that liquid can drop out when running the transport lock procedure.
INFO:
Use a suitable box for storing the EFOY Pro fuel cell, e.g., the box in which
it was delivered. The EFOY Pro fuel cell must be stored in an upright
position only.
6.3
Firmware update
Be sure to check on a regular basis which updates are available for your
firmware.
Simply connect the EFOY Updater to your EFOY Pro fuel cell data interface
at the front side to perform the update.
INFO:
For an update with the EFOY Updater the RS232 data interface has to be
activated. If RS485 is in use change the communication interface to
RS232.
For information on the latest firmware updates and the Updater, please
contact your service partner or go to www.efoy-pro.com.
6.4
Cleaning
WARNING!
Switch the device off and disconnect the charge line before cleaning.
The device is not water-tight. Please ensure that no moisture can enter
the device.
1.
Clean only with a soft cloth dampened with a mild detergent.
2.
Reconnect the battery charge line after cleaning so that the
automatic antifreeze feature remains activated (see chapter 5.5
"Automatic antifreeze mode" on page 64).
Page 68
Maintenance
Advertisement
Table of Contents
