Table of Contents
Advertisement
INFO:
Keep the exhaust hose as short as possible. The portion of the hose that
penetrates outside should be no longer than 5 cm / 5.9 in. Cut the end of
the hose diagonally to prevent drop formation.
The exhaust hose must not be damaged or replaced by another hose.
Take precautions to prevent the exhaust hose from freezing in winter.
The exhaust hose must be no longer than 50 cm / 19.7 in. It is essential
to use hose insulation in winter. The exhaust hose may be up to 100 cm /
39.4 in long for summer operation and during transitional seasons.
INFO:
Avoid siphoning in the hose as this prevents the passage of the exhaust
gas.
To prevent siphoning, ensure that the hose is pointing downwards.
Page 28
1.
Remove the protective cap from the
exhaust gas outlet of the EFOY Pro
fuel cell. Keep this for winter
storage or in case you need to
return the fuel cell.
2.
Attach the insulated exhaust hose
supplied to the exhaust gas outlet.
3.
Take measurements to determine
where to drill the duct opening. The
duct opening should consist of a
hole with a 18 mm / 0.7 in diameter.
4.
Drill a hole for the exhaust hose.
5.
Feed the exhaust hose from the
installation space through to the
outside.
6.
Use a suitable sealant to seal the
hole. Ensure that the exhaust hose
has no kinks or blockages and that
the exhaust gases can flow freely out
of it.
Installation
Advertisement
Table of Contents
