Table of Contents
Advertisement
Installation
4
Installation
4.1
Installation space requirements
Installation should be carried out by trained personnel.
Ensure that there is sufficient unoccupied space behind the installation
area before you drill or saw any openings. Please also observe the safety
information provided by the tool manufacturers.
CAUTION!
Solvents may emit fumes during sealing. Ensure that there is sufficient
ventilation and follow the instructions for using the sealing compound.
When choosing a location in which to install the fuel cell, please
remember that the permitted operating temperature range for the device
is -20°C to +50 °C / -4°F to +122 °F.
CAUTION!
If the temperatures in the installation space exceed +50 °C / +122 °F the
EFOY Pro fuel cell will shut down and not produce energy.
As soon as the temperature in the installation space fall below +40 °C /
+104 °F the EFOY Pro 12000 Duo will start again fully automatic.
CAUTION!
The device requires an air supply and generates off-heat and exhaust
gases. The off-heat and exhaust gases must be released into the open air.
Page 21
Advertisement
Table of Contents
