Flow Meters, Pump Stand Valves - USC LPX Operator's Manual

LPX AUTOMATED SEED TREATER
FLOW METERS
Each LPX Treater Pump Stand comes with either a volumetric or mass flow meter.
A flow meter is used to perform real-time chemical flow adjustments and monitoring
without the operator having to handle the chemical. The flow meter reading will be
displayed on the HMI touch screen and can be set to read in oz/min or ml/min.
Volumetric Flow Meter Mass Flow Meter
PUMP STAND VALVES
SEED TREATMENT SOURCE VALVE:
This valve controls where the pump is
drawing liquid from. It allows liquid to be pulled from either the bottom of the mix tank
or the calibration tube.
Drawing chemical from the bottom of Drawing chemical from the bottom of
the Mix Tank the Calibration Tube
Page 25