H-O-A Screen - USC LPX Operator's Manual

LPX AUTOMATED SEED TREATER
Main Screen Button Descriptions
1. SEED FLOW RATE:
Displays the seed flow rate in pounds per minute.
2. SEED TYPE INDICATOR:
Displays the type of seed has been selected in the
"Product Selection" screen.
3. TOTALIZED WEIGHT DISPLAY:
Displays the total pounds of seed as it passes
through the seed wheel.
4. CURRENT DATE AND TIME DISPLAY.
5. SEED WHEEL MOTOR STATUS INDICATOR:
Informs the operator if the seed
wheel is ON or OFF.
6. HOPPER FULL:
Informs the operator when the proximity switch located in the
supply hopper above the seed wheel is detecting seed. When the indicator is active
any equipment plugged into the Inlet Conveyor plug will be turned off.
7. HOPPER EMPTY:
Informs the operator when the proximity switches located in the
seed wheel are not detecting seed.
8. INLET CONVEYOR MOTOR STATUS INDICATOR:
Informs the operator if the
inlet conveyor is ON or OFF"
9. OUTLET CONVEYOR MOTOR STATUS INDICATOR:
Informs the operator if the
outlet conveyor is ON or OFF.
10. SEEDS / LB:
Indicates how many seeds are in a pound when running in SCU
mode. This indicator will only appear if at least one of the pump stands has been set
to run in the SCU mode.
11. CUP WEIGHT:
Pressing this button will bring up a numeric keypad (below) which
allows the operator to input the cup weight for the Seed Wheel.
12. H-O-A"(Hand-Off-Auto):
This button advances the operator to the H-O-A screen
(page 33).
13. UTILITIES:
This button advances the operator to the "Utilities" screen (page 37).
14. USC LOGO BUTTON:
When the treater is being used in conjunction with a bin
site this button allows the operator to toggle back and forth between the main treater
screen and the main bin site screen.
Page 31