USC LPX Operator's Manual page 16

14. Connect any conveyors that need to be
controlled through the touch screen control
panel to the bottom of the treater control
panel.
.
15. It is required that this air supply have an
in-line customer supplied air dryer to protect
the air system from contamination. Supply
approximately 100 - 110 pounds of air
pressure from the dryer to the port on the
air actuated 3-way valve located on the
pump stand frame behind the electric
control panel.
16. Connect a dedicated analog phone line to
the modem located in the top right portion
of the automated control panel. This will
allow USC remote access to the seed
treater.
Analog Phone Line Hooked Up Here
Page 16
LPX AUTOMATED SEED TREATER
TREATER SET - UP
Air Supplied Here