Pump Stand Valves - USC LPX Series Operator's Manual

Seed Treatment Source Valve:
from. It allows liquid to be pulled from either the bottom of the mix tank or the
calibration tube.
Drawing chemical from the bottom of
the Mix Tank
Seed Treatment Valve:
controls the direction of the liquid
coming from the pump. It will either
direct liquid to the Atomizer or to the
Seed Treatment Return Valve.
Pumping liquid to
the Seed Treatment
Return valve.
Page 22
LPX MANUAL SEED TREATER

PUMP STAND VALVES

This valve controls where the pump is drawing liquid
This valve
Pumping liquid to
atomizer. Used
when treating
seed.
USC,
Drawing chemical from the bottom of
the Calibration Tube
Seed Treatment Return Valve:
valve directs the liquid coming from the
To Calibrate / To Mix Tank side of the
Seed Treatment Valve to either fill the
Calibration Tube or return to the Mix Tank.
Pumping liquid into
the top of the mix
tank for
recirculation
purposes.
LLC
This
Pumping liquid into
the top of the
calibration tube for
calibration
purposes
.