USC LPX Operator's Manual page 32

15. PUMP STATUS MODULES:
pump motor status ON or OFF, air actuated 3-way valve status, currently selected
chemical, target flow rate and actual flow rate from flow meter.
16. ATOMIZER MOTOR STATUS INDICATOR:
motor is ON or OFF.
17. USC LOGO BUTTON
the START button is pushed and the system begins to operate it becomes the PAUSE
button.
18. START BUTTON:
placed into the AUTO position. Once the button is pushed and the system begins to
operate it becomes the SHUTDOWN button.
19. DRUM MOTOR STATUS INDICATOR:
motor is ON or OFF".
20. EMERGENCY STOP INDICATOR:
system's E-Stop button is activated.
Chemical Name
Target Chemical Rate
per 100 lbs of Seed
Actual Flow Rate of
Pump on a per
minute basis
SEED COUNT UNITS / OUNCES PER CUT WEIGHT
Chemical Name
Target Chemical Rate
per Seed Count Unit
Actual Flow Rate of
Pump on a hundred
weight basis
Actual flow rate of pump may be defined as either oz/min or oz/cwt
regardless of the target rate setting (oz/cwt or oz/scu)
Page 32
LPX AUTOMATED SEED TREATER
Main Screen Button Descriptions
This block of information informs the operator of the
: Allows the operator to toggle to the Start screen. Once
This is used to start the machine after all motors have been
This blinking display is activated when the
CUT WEIGHT / OUNCES PER MINUTE
Informs the operator if the atomizer
Informs the operator if the drum drive
Pump Motor Status
( ON or OFF )
Informs the operator
if the Pump is in
Re-circulate or
Process
Pump Motor Status
( ON or OFF )
Informs the operator
if the Pump is in
Re-circulate or
Process