USC LPX Operator's Manual page 69

To access inside of atomizer housing, push up on the quick release handle and slide
back the atomizer (below).

Slide back atomizer housing and grease
bearing inside. Bearing needs just one
pump of grease every 40 hours of use
(right).

Clean any build-up inside the housing and
the atomizer head. To remove the
atomizer head, loosen the set screw
located on the bottom of the head.

Check for any play in the atomizer shaft.

Make sure the atomizer spins smoothly.

Ensure the adjustable chute is fitting
completely into the drum opening.
Adjust if necessary.
LPX AUTOMATED SEED TREATER
ATOMIZER
Atomizer Head
Quick-Release
Handle
Bearing Set Screw
Page 69