Display Mode; Adjusting Display Contrast - Baldor ID15J1F50-ER Installation And Operating Manual

Display Mode

During normal operation the controller is in the display mode and the keypad
displays the status of the control. Several output status values can be
monitored.
Motor Status
Control Operation
The display mode also gives the user the ability to view diagnostic information
and the fault log.

Adjusting Display Contrast

When AC power is applied to the control the keypad should display the status
of the control. If there is no display visible, use the following procedure to
adjust the display.
Action
Apply Power
Press DISP Key
Press SHIFT
SHIFT
Press Y or B Key
Press ENTER
MN715J
Description
No visible display
Places control in display mode
Allows display contrast adjustment
Adjusts display intensity
Saves level of contrast and exits
to display mode
Output Status
Value and Units
Display
Programming and Operation 4-5