Diagnostic Information Access - Baldor ID15J1F50-ER Installation And Operating Manual

Diagnostic Information Access

Action
Apply Power
Press DISP key
several times
Press ENTER
key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Note: In Diagnostic mode only, press DISP to display next item or press SHIFT to
display previous item.
MN715J
Description
Display of mode & drive status.
Scroll to Diagnostic Info entry point.
Access diagnostic information.
Control temperature.
Bus voltage.
PWM Frequency.
% overload current remaining.
Display of HP, voltage, rated peak &
continuous current.
Real time opto inputs & relay outputs
states. (0=Open, 1=Closed)
Display of Analog Inputs.
(Displayed in Process Control mode
only) Display of "Proportional",
"Integral" and "Derivative" terms.
(Displayed in Process Control mode
only) Display of "Feedforward" (1st
line), "Setpoint" and "Feedback"
equiv. freq. (2nd line, left to right)
Operating time.
Display of software version.
Displays exit choice.
Press ENTER to exit.
Display
Programming and Operation 4-7
25.0
2500