Reset Parameters To Factory Settings - Baldor ID15J1F50-ER Installation And Operating Manual

Reset Parameters to Factory Settings

Sometimes it is necessary to restore the parameter values to the factory
settings (after new software is installed, etc.). This procedure describes how
to restore factory settings.
Note: All parameter values already programmed will be changed when resetting the
control to factory settings.
Action
Apply Power
Press PROG key
Press Y or B key
Press ENTER key
Press Y or B key
Press ENTER key
Press ENTER key
Press Y key
Press ENTER key
Press RESET key
Press Y key
4-10 Programming and Operation
Description
If no faults and programmed for
LOCAL operation.
Enter program mode.
Scroll to Level 2 Blocks.
Select Level 2 Blocks.
Scroll to the Miscellaneous block.
Select Miscellaneous block.
Access Factory Settings
parameter.
Scroll to YES, to choose original
factory settings.
Restores factory settings.
Return to Miscellaneous block.
Scroll to menu exit.
Display
MN715J