Zx_Get; Zx_Set - Newport SMC100CC Command Interface Manual

SMC100CC & SMC100PP

2.2.2.85 ZX_Get

Syntax
int ZX_Get(int controllerAddress, out int Mode, out string errstring)
controllerAddress: controllerAddress
Mode: Mode
errString: The failure reason
return: 0 in success and -1 on failure
Description
This function is used to process synchronous ZX Get command which is used to Get
ESP stage configuration. Refer to the Controller's manual to get the command
description.

2.2.2.86 ZX_Set

Syntax
int ZX_Set(int controllerAddress, int Mode, out string errstring)
controllerAddress: controllerAddress
Mode: Mode
errString: The failure reason
return: 0 in success and -1 on failure
Description
This function is used to process synchronous ZX Set command which is used to Set
ESP stage configuration. Refer to the Controller's manual to get the command
description.
29
Command Interface Manual
EDH0311En1021 – 09/18