Spreading In The Man Km/H Operating Mode - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

5.5

Spreading in the MAN km/h operating mode

If there is no forward speed signal, the MAN km/h operating mode is active.
1. Switch on the QUANTRON-A control unit.
2. Open the Machine settings > AUTO/MAN mode menu.
3. Select MAN km/h in the menu.
4. Enter the forward speed.
5. Press OK.
6. Configure the fertiliser settings:


7. Insert fertiliser.
In order to achieve an optimum spreading result in the MAN km/h operating
mode, a calibration is to be carried out before starting the spreading.
8. Carry out a calibration to determine the flow factor
or
Obtain the flow factor from the fertiliser chart.
9. Enter the flow factor manually.
10. Press the Start/Stop key.
 The spreading starts.
Always observe the set speed during spreading.
Spreading operation with the QUANTRON-A control unit
Application rate (kg/ha)
Working width (m)
NOTICE
NOTICE
5
93