Calculate Optipoint (Axis Only) - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4 Operation QUANTRON-A
4.6.9

Calculate OptiPoint (AXIS only)

In the Calculate OptiPoint menu, you can enter the parameters to calculate the
optimum switch-on and switch-off distances in the headlands.
It is very important to enter the distance factor of the fertiliser used to obtain an
exact calculation.
The range index number for the fertiliser used can be taken from the fertiliser
chart of the machine.
1. Enter the prescribed value in the Fertiliser settings > Distance factor menu.
2. Open the Fertiliser settings > Calculate OptiPoint menu.
 The first page of the Calculate OptiPoint menu is displayed.
The indicated forward speed refers to the forward speed in the area of the
switching positions! See chapter
3. Enter the average forward speed in the range of switching positions.
4. Press OK.
5. Press the Enter key.
 The third page of the menu is displayed.
Figure 4.12: Calculate OptiPoint, page 3
Number
1
2
50
Meaning
Distance (in meters) with reference to the field bor-
der at which the metering sliders open.
Distance (in meters) in reference to the field border
from which the metering sliders close.
NOTICE
NOTICE
5.7: GPS Control, page
1
2
95.
Description
Page 96
Page 97