Application Rate; Working Width - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4 Operation QUANTRON-A
4.6.1

Application rate

In this menu, you can enter the desired target value for the application rate.
Entering the application rate:
1. Open the Fertiliser settings > Appl. rate (kg/ha) menu.
 The currently applied application rate is displayed.
2. Enter the new value in the input field.
See chapter
3. Press the Enter key.
 The new value is saved in the control unit.
4.6.2

Working width

You can set the working width (in meters) in this menu.
1. Open the Fertiliser settings > Working width (m) menu.
 The currently applied working width is displayed.
2. Enter the new value in the input field.
See chapter
3. Press the Enter key.
 The new value is saved in the control unit.
42
4.13.2: Entering values with the cursor keys, page
4.13.2: Entering values with the cursor keys, page
84.
84.