Stopping The Recording; Deleting Field Data - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4 Operation QUANTRON-A
4.9.3

Stopping the recording

1. Open the 1st page of the active field data in the Field data menu.
2. Press the F2 function key below the stop symbol.
 The recording is stopped.
4.9.4

Deleting field data

The control unit QUANTRON-A facilitates the deletion of recorded field data.
Only the content of the field data will be deleted, the field data name will still be
displayed in the name field!
Deleting field data
1. Call up the Field data menu.
2. Select field data from the list.
3. Press the F3 function key below the Delete icon (see
 The selected field data has been deleted.
Deleting all field data
1. Call up the Field data menu.
2. Press the F2 function key below the Delete all icon (see
 A message appears indicating that all data will be deleted (see
3. Press the Start/Stop key.
 All field data are deleted.
68
message meanings, page
NOTICE
99).
Figure 4.20).
Figure 4.20).
6.1: Alarm