Gps Control Information - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

On this page, you can manually adjust the parameters. See chapter
Control, page
Changing the values
6. Highlight the selected input.
7. Press the Enter key.
8. Enter the new values.
9. Press the Enter key.
10. Highlight the Accept values menu item.
11. Press the Enter key.
 The menu GPS Control Info is displayed.
 The OptiPoint has been calculated.
 The control unit changes to the GPS Control Info window.
4.6.10

GPS control information

The GPS Control Information menu provides information on the calculated val-
ues set in the Calculate OptiPoint menu.
Manually enter the values displayed here in the respective settings menu of

the GPS terminal.
This menu is for information purposes only.

95.
Observe the operator's manual of your GPS terminal.
Operation QUANTRON-A
NOTICE
NOTICE
4
5.7: GPS
51