Drop Point; Telimat Quantity - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4.6.4

Drop point

Entering the drop point with the Q M-AXIS is merely informative and does not
affect the settings of the fertiliser spreader.
In this menu, you can enter the drop point for information purposes.
1. Open the Fertiliser settings > Drop point menu.
2. Determine the position for the drop point using the fertiliser chart.
3. Enter the determined value in the input field.
See chapter
4. Press the Enter key.
 The Fertiliser settings window with the new drop point is displayed.
4.6.5

TELIMAT quantity

In this menu, the TELIMAT quantity reduction can be set (in percent). This setting
is used for the activation of the boundary spreading function via the TELIMAT
sensor or the T key.
It is recommended to reduce the application rate at the boundary spreading side
by 20 %.
Entering the TELIMAT quantity:
1. Open the Fertiliser settings > TELIMAT Quantity menu.
2. Enter the value in the input field.
Refer to chapter
3. Press the Enter key.
 The fertiliser settings window with the new TELIMAT quantity is displayed.
NOTICE
4.13.2: Entering values with the cursor keys, page
NOTICE
4.13.2: Entering values with the cursor keys, page
Operation QUANTRON-A
84.
4
84.
45