Fertiliser Chart - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4 Operation QUANTRON-A
4.6.11

Fertiliser chart

In these menus, you can create and manage your own fertiliser charts.
The selection of a fertiliser chart has an effect on the fertiliser settings, the con-
trol unit and the mineral fertiliser spreader. The set application rate is overwrit-
ten by the stored value from the fertiliser chart.
Creating a new fertiliser chart
The control unit can store up to 30 fertiliser charts.
1. Open the Fertiliser settings > Fertiliser chart menu.
Figure 4.13: Fertiliser chart menu
[1] Fertiliser chart name field
[2] Display of active fertiliser chart
[3] Display of the fertiliser chart filled with values
2. Highlight the name field of an empty fertiliser chart.
3. Press the Enter key.
 The selection window is displayed.
4. Highlight the Open element... option.
5. Press the Enter key.
 The Fertiliser settings menu is displayed and the selected element is
6. Highlight the Fertiliser name menu item.
7. Press the Enter key.
8. Enter a name for the fertiliser chart.
We recommend naming the fertiliser chart after the fertiliser. This makes it is
easier to assign fertilisers to the fertiliser chart.
9. Edit the parameters of the fertiliser chart.
See chapter
52
loaded into the fertiliser settings as Active fertiliser chart.
4.6: Fertiliser settings in Expert mode, page
NOTICE
NOTICE
1
2
3
39.