Fast Emptying - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4.8

Fast emptying

To clean the machine after spreading or to quickly empty residual spreading ma-
terial, select the Fast emptying menu.
Before storing the machine, it is recommended that you also completely open the
metering slides using the fast emptying function and to switch off the QUANTRON-
A in this state. This prevents accumulation of humidity in the hopper.
Before starting the fast emptying process, it is to be ensured that all precondi-
tions have been met. Observe the operating manual for the fertiliser spreader
(emptying of residual quantities).
1. Open the Main menu > Fast emptying menu.
4
Figure 4.19: Fast emptying menu
[1] Metering slide opening display
[2] Symbol for fast emptying (here: left side selected, but not yet started)
[3] Fast emptying of right section (here: not selected)
[4] Fast emptying of left section (here: selected)
n CAUTION
Risk of injury due to automatic adjustment of the drop point!
With machines equipped with electrical drop point actuators,
theMove to drop point alarm message appears. Press
Start/Stop to automatically move the drop point to the preconfig-
ured value using the electrical actuating cylinder. This may cause
injury and material damage.
 Before pressing Start/Stop, ensure that nobody is present
in the hazard zone of the machine.
Operation QUANTRON-A
NOTICE
4
1
2
3
63