Operation Quantron-A; Control Unit Activation - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4

Operation QUANTRON-A

AXIS-M EMC (+W) only
The settings in each menu are very important for optimal
automatic mass flow control.
Make sure you observe the following menu entries in particular:
In the Fertiliser settings menu

-
-
In the Machine settings menu

-
4.1

Control unit activation

Requirements:
The control unit is connected properly to the mineral fertiliser spreader and the

tractor (for an example, see chapter
A minimum voltage of 11V is guaranteed.

The operating manual describes the control unit functions QUANTRON-A as of
software version 3.10.00.
Risk of injury due to ejected fertiliser
In the case of a fault, it is possible that the metering slide will open
unexpectedly during road transportation to the spreading location.
There is a risk of slipping and personal injury due to ejected fertil-
iser.
 Before leaving for the spreading location the electronic
control unit QUANTRON-A must always be switched off.
Spreading disc., see
PTO speed, see Page
AUTO/MANUAL operation, see
Operation QUANTRON-A
n CAUTION
NOTICE
Page 49.
49.
Page 58 and chapter [5].
3.3: Connecting the control unit, page
NOTICE
4
21).
29