Machine Settings - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4 Operation QUANTRON-A
4.7

Machine settings

The Machine menu. The Fertiliser settings menu is different for the fertiliser
spreader AXIS and MDS.
In this menu, the tractor and machine settings can be configured.
Open the Machine settings menu.

Figure 4.14: Machine settings menu (example)
Sub-menu
Tractor (km/h)
AUTO / MAN mode
+/- appl. rate
Signal for empty run
measurement
kg level sensor
Easy toggle
Application corr. L/R
(%)
54
NOTICE
Meaning
Determining or calibrating the speed sig-
nal.
Determining the automatic or manual
operating mode.
Pre-setting the quantity reduction for the
different spreading types.
AXIS-M EMC only: Activation of the sig-
nal tone when starting the automatic
empty run measurement
Entering the residual quantity to trigger
an alarm message via the weigh cells.
For AXIS only: Restricts the L%/R%
toggle key to two conditions
Correction of the deviations between the
entered application rate and the actual
application rate.
Correction in percent either on the

right or left side
Description
Page 55
Page 58
Page 61
Page 62