4.10.3
Mode
In the QUANTRON-A control unit, 2 different modes are possible:
The Easy mode or the Expert mode.
For the M EMC function, the mode is automatically set to Expert
In the Easy mode, only the parameters of the fertiliser settings required for
spreading can be accessed: It is not possible to create or manage fertiliser
charts.
In Expert mode, all available parameters can be accessed in the Fertiliser
settings menu.
Selecting a mode
1. Highlight the System/Test > Mode menu entry.
2. Press the Enter key.
The active mode is displayed.
You can switch between the two modes by pressing the Enter key.
Operation QUANTRON-A
NOTICE
4
73