Gps Control - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

5.7

GPS Control

The QUANTRON-A control unit can be combined with GPS-compatible devices.
Various data is exchanged between both devices to automate control.
We recommend using our QUANTRON-Guide control unit in combination with
QUANTRON-A.


The OptiPoint function calculates the optimal switching-on and switching-off
point for spreading in the headlands on the basis of the settings in the control unit;
see 4.6.9: Calculate OptiPoint (AXIS only), page
To use the GPS Control functions of QUANTRON-A, the serial communication
must be activated via the GPS Control sub-menu point in the System / Test >
Data transmission menu.
The symbol A next to the spreading wedges indicates that the automatic function
is enabled. The control unit opens and closes the individual sections depending
on the respective position in the field. The spreading starts only after pressing
Start/Stop.
Figure 5.5:
Spreading operation with the QUANTRON-A control unit
Please contact your dealer for further information.
Observe the operating manual for QUANTRON-Guide.
Risk of injury due to ejected fertiliser
The GPS Control function starts the spreading operation automati-
cally, without warning. Escaping fertiliser may lead to injury of the
eyes and nasal mucous membrane. There is also a risk of slipping.
 Ensure that nobody is present in the hazard zone during
the spreading operation.
Spreading operation display in the operating screen with GPS
Control
NOTICE
50.
NOTICE
n WARNING
5
95