Auto/Man Mode - Rauch QUANTRON-A AXIS-M 20 Q Instruction Manual

4 Operation QUANTRON-A
4.7.2

AUTO/MAN mode

The default operating mode is AUTO. The control unit automatically controls the
actuators based on the speed signal.
The manual mode is only applied in the following cases:
there is no speed signal (radar or wheel sensor not available or defective),

application of slug pellets or seeds (fine seeds).

To ensure regular spreading of the spreading material in manual operating
mode, it is imperative to work with a constant forward speed.
Menu
AUTO km/h + AUTO kg
AUTO km/h
MAN scale
MAN km/h
Operating mode selection
1. Switch on the QUANTRON-A control unit.
2. Open the Machine settings > AUTO/MAN mode menu.
3. Select the required menu item.
4. Press the Enter key.
5. Follow the instructions on the screen.
Important information on the use of the operating modes during spreading op-

eration is provided in chapter
control unit, page
The specified operating mode is displayed in the operating screen.
AUTO km/h + AUTO kg: automatic operation with automatic mass flow con-
trol:
The AUTO km/h + AUTO kg operating mode continuously controls the fertiliser
quantity during spreading according to the forward speed and the fertiliser's flow
behaviour. This optimises the metering of the fertiliser.
58
NOTICE
Meaning
AXIS only: Selecting the automatic
mode with automatic weighing
Selection of automatic mode
Metering slide adjustment for manual
mode
Adjustment of forward speed for man-
ual mode
5: Spreading operation with the QUANTRON-A
87.
NOTICE
Description
Page 58
Page 92
Page 94
Page 93