Configuring Mac Address Filtering - Cisco RV315W Administration Manual

Security

Configuring MAC Address Filtering

STEP 4
STEP 5
Configuring MAC Address Filtering
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Click OK to save your settings and return to the Access Control page.
To edit the settings of an access control policy, select the corresponding policy
and click the Edit icon. To delete an access control policy, select the
corresponding policy and click the Delete icon.
MAC address filtering permits and blocks network access from specific devices
through the use of MAC address list.
To configure MAC address filtering:
Click Security > MAC Address Filtering. The MAC Address Filtering page opens.
Select one of the following filtering policies:
• Block Access Network: The MAC addresses in the list are blocked and all
other MAC addresses not included in the list are permitted.
• Allow Access Network: Only the MAC addresses in the list are permitted
and all other MAC addresses not included in the list are blocked.
In the MAC Addresses List area, specify the list of MAC addresses. To add a MAC
address, click Create. The MAC Address Filtering Policy page opens.
Up to 20 MAC addresses can be configured on the RV315W.
Enter the following information:
• MAC Address: Enter the MAC address that you want to filter.
• Time Range: Enter the starting time and ending time to keep the MAC
address filtering rule active at specific times.
• Week: Check the days to keep the MAC address filtering rule active at
specific days.
Click OK to save your settings and return to the MAC Address Filtering page.
8
82