Configuring Ipv4 Loop-Free Alternate Fast Reroute Support: Example; Additional References - Cisco NCS 6000 Series Configuration Manual

Configuring IPv4 Loop-Free Alternate Fast Reroute Support: Example

Command or Action
RP/0/RP0/CPU0:router(config-isis-if-af)#
fast-reroute per-prefix
Configuring IPv4 Loop-Free Alternate Fast Reroute Support:
Example
The following example shows how to configure IPv4 LFA FRR.
router isis core
is-type level-2-only
net 47.0001.0000.0000.8888.00
address-family ipv4 unicast
metric-style wide
exit
!
interface Bundle-Ether 9
point-to-point
address-family ipv4 unicast
fast-reroute per-prefix
!
!

Additional References

The following sections provide references related to implementing IPv4/IPv6 Loop-Free Alternate Fast
Reroute.
Related Documents
Related Topic
IS-IS commands
MPLS
commands
MIBs
MIBs
—
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
350
Document Title
Routing Command Reference for Cisco NCS 6000 Series Routers
Routing Command Reference for Cisco NCS 6000 Series Routers
MIBs Link
To locate and download MIBs using Cisco IOS XR software, use the Cisco MIB Locator found at the
following URL and choose a platform under the Cisco Access Products menu:
sw-center/netmgmt/cmtk/mibs.shtml
Implementing IP Fast Reroute Loop-Free Alternate
Purpose
http://cisco.com/public/